Care Guide
With a little simple care, your Consculpt concrete basin or benchtop can continue to look beautiful for years to come.
Every Consculpt piece is handcrafted from Glass Fibre Reinforced Concrete (GFRC) and sealed to provide excellent water and stain resistance. Concrete is a naturally individual material, however, and should be treated with the same consideration you would give any quality bathroom finish.
How to clean your concrete basin
For everyday cleaning, use warm water with a soft cloth or non-abrasive sponge. A mild, pH-neutral cleaner can be used when required. Rinse the surface after cleaning and wipe away excess water with a soft cloth.
Avoid abrasive pads, scouring powders and harsh cleaning products, as these can dull or damage the protective finish over time.
Products to avoid
Do not use acidic, highly alkaline or solvent-based cleaners on your Consculpt piece. Products such as bleach, strong bathroom cleaners, oven cleaner, drain cleaner and abrasive compounds can damage the sealed surface.
If a cosmetic, cleaning product or other substance is spilled on the basin, rinse it away promptly rather than allowing it to sit on the surface for an extended period.
Preventing stains and marks
Our sealing system provides a high level of stain resistance, but no surface is completely maintenance free. Wipe away spills and standing residue when practical, particularly strongly coloured products, cosmetics, soaps and personal-care products.
Avoid leaving metal objects or containers that may rust sitting wet on the surface, as they can leave marks.
Avoid scratches and impact damage
GFRC is strong and durable, but the finished surface should still be treated with care. Avoid cutting directly on the surface, dragging sharp or abrasive objects across it, or dropping heavy objects into the basin.
Small variations in colour, texture and pinholing are natural characteristics of handcrafted concrete and are not defects. These subtle differences are part of what gives each Consculpt piece its individual character.
Sealing and ongoing maintenance
Consculpt basins are finished with a protective sealing system designed for bathroom use. Over time, the surface may benefit from additional care depending on how frequently the basin is used and the products it is exposed to.
Follow the instructions supplied with your Consculpt care products and contact us if you are unsure whether your basin requires maintenance. Avoid applying third-party sealers, polishes or coatings without checking with Consculpt first, as they may not be compatible with the existing finish.
Looking after handcrafted concrete
Concrete naturally develops character with age. Following these simple cleaning and maintenance practices will help protect the sealed finish while allowing the material to retain the subtle variation that makes it distinctive.
If you have any questions about cleaning, staining, sealing or caring for your Consculpt concrete basin, please contact us before using an unfamiliar product or treatment.
Every Consculpt basin is handcrafted in Wānaka, New Zealand.
When your new piece arrives.
Please make certain your Consculpt piece is installed correctly by trade professionals and ensure it is protected from spills, heavy objects or rough use particularly within the first month, as this will ensure the sealant has hardened appropriately over this time.
When you’re wiping down and cleaning up.
Clean as you go. Use a damp, soft microfiber cloth to prevent stains and, if necessary, a mild and non-abrasive cleaning agent. Avoid scourers and strong cleaning chemicals.
When you’ve spilled stuff.
Your Consculpt piece has a high natural tolerance against stains and our specialist sealant ensures stuff like toothpaste, soap, coffee and wine can be repelled. However no substance should stay on the surface and if there’s anything spilled on it you should clean it quickly with a mild soap and cool water. Also avoid spilling harsh substances like paint stripper, nail polish, plutonium etc on your piece, as this will destroy the sealant.
When you need to maintain those good looks.
A good application of wax will work wonders when it comes to refreshing your piece. Visually you should be able to tell when certain areas of your piece need wax. If you’re unsure we suggest giving it a maintenance wax with each new season, as this is an easy way to remember. First day of Spring? Give it a good wax and polish.
When you’re wondering what else to remember.
Keep it dry and wipe it when you can. Remember to avoid rough scourers or harsh cleaning agents. Look after your Consculpt concrete and it will look after you — providing year after year of strength and beauty, form and functionality.